Archive for June, 2018

Bike rafting Manley to Rampart and back

Thursday, June 7th, 2018

[AFG_gallery id=’1′]

A year or so ago my friend Tom suggested doing some sort of loop using packrafts and bikes involving the new “pioneer” road to Tanana. Eventually a route was worked out, starting in Manley, taking the Eliot highway over to Eureka, then taking an old road to Rampart, floating down the Yukon to the new Tanana road, and taking that back to Manley. The basic idea was pretty awesome – a loop, involving bikes, pack-rafts, two new (to me) roads, and a new (to me) section of the Yukon river. Hurrah!

Details on the road to Eureka to Rampart were a bit spotty, but I was told by a musher based in Eureka it should be fine except for a few “wet” spots.

The trip started after work, when Tom, Heath, and I loaded up into Heath’s truck and headed to Manley. Manley is small town with a nearby privately owned hotsprings and a small roadhouse. Alas, the roadhouse was closed, but we wandered the town a bit, seeing the sights.


Manley Loop, via Rampart and the Yukon

(Tom and Heath, peering into the abandoned Alaska Commercial Company’s old building)

In the morning we headed out on the Eliot Highway to Eureka. Eureka was once a gold rush town, but now appears to be mostly inhabited by a few mushers and some smaller gold mining operations.


Manley Loop, via Rampart and the Yukon

Manley Loop, via Rampart and the Yukon

After Eureka we slowly climbed up and over a pass, heading down to Minook Creek, which we were to follow all the way to Rampart. The “road” was in great shape and we had high hopes of zooming off to Rampart.

DSC00124

Manley Loop, via Rampart and the Yukon

Alas, the road turned into a muddy trail ended near Granite Creek, and things slowed down.


Manley Loop, via Rampart and the Yukon

Manley Loop, via Rampart and the Yukon

Manley Loop, via Rampart and the Yukon

Five hours, four deepish stream crossings, and around 10 miles later we neared Rampart, and were finally back on fast, firm roads again.


Manley Loop, via Rampart and the Yukon

Manley Loop, via Rampart and the Yukon

Manley Loop, via Rampart and the Yukon

Manley Loop, via Rampart and the Yukon

Manley Loop, via Rampart and the Yukon

We did a short tour of Rampart, which was a very quiet town, talked to a few locals who were a bit surprised to see someone arriving on bikes, then camped on a out of the way gravel bar.

The next morning we loaded up onto our boats, and headed down the Yukon.


Manley Loop, via Rampart and the Yukon

Manley Loop, via Rampart and the Yukon

Manley Loop, via Rampart and the Yukon

I was a bit worried about the “bike rafting” part of this trip, as I had only done one short test float with a bike on my boat, but it turned out to be much easier than I expected. We spent the rest of the day floating down the Yukon, until mid afternoon, when the wind picked up, and camped just before the “Rampart Rapids”, a short section of faster water about halfway to our takeout point. I had been told it was only a rapid in name, and was just some slightly faster water. Our campsite was on a little fresh water creek named Bear Creek, and was a great spot except for a swarm of stink bugs that found our tents and Heath’s gloves fascinating.


Manley Loop, via Rampart and the Yukon

The next day we continued down the Yukon, bobbing down the Yukon until we arrived at the Tanana road.

Manley Loop, via Rampart and the Yukon

The Yukon was much more scenic than I expected, with beautiful bluffs and big hills in the distance.


Manley Loop, via Rampart and the Yukon

Manley Loop, via Rampart and the Yukon

Manley Loop, via Rampart and the Yukon

Manley Loop, via Rampart and the Yukon

We arrived at the Tanana road early afternoon, and switched back into biking mode.


Manley Loop, via Rampart and the Yukon

Alas, the Tanana road ends at the Yukon, about 8 miles or so upstream of Tanana on the other side of the Yukon, so we didn’t visit the village, instead biked 13 or so miles and camped in a wonderful mossy spot on a hill. While we were sitting in camp that evening Heath and I had a bit of a panic after we convinced ourselves the maps we had contour intervals in meters, and noticed we had a handful of bigger than 500 meter climbs on the way to Manley. Fortunately we figured out our mistake, mainly that they were actually in feet, and went to bed happy we didn’t have thousands of feet of climbing ahead of us.

The Tanana road was in great shape for biking, but maybe a bit rough for vehicle traffic.


Manley Loop, via Rampart and the Yukon

Most of it was in great shape, but it was very soft in a few spots, and the surface had lots of the sort of gravel and rock pieces that are hard on car tires.

The next morning we rode the remaining 30 ish miles into Manley, enjoying a few hot climbs (that were not thousands of feet tall) and dusty downhills.


Manley Loop, via Rampart and the Yukon

We arrived in Manley dusty and dirty, to learn one of us (probably me – duh!) had left an interior light on, and had drained the battery. Fortunately someone gave us a jump, and we on our way back home.


Manley Loop, via Rampart and the Yukon

This trip was pretty fun, but folks interested in replicating it should be aware that there is a lot of muddy soft trail after Granite Creek (mile 12 or so of the road/trail from Eureka to Rampart).

Gear wise, I did this trip with my Surly Ice Cream truck with some “normal” wheels with three inch tires. It worked great, but I was a bit surprised how little extra grip on got on the mud, and by how much the air pressure varied as we passed though cold creeks and hot sun. Tom’s boat has the “cargo fly”, zippers that let him store stuff inside the boat, which worked fantastic. I was jealous, and I think I have one of those in my future.