New Bike Day!

My daughters say the only thing I care about are bikes and dogs. I of course think they are exaggerating, but bikes (and dogs) are important to me.

My first snow bike was a Surly 1X1 I got in the 2009 time frame. It was second or third hand from an UAF grad student who built it then decided he didn’t really enjoy riding it. When I got it it was set up as a fixie, with no brakes and a really tall gear. Also the guy I got it from was at least four inches taller than me – the bike was huge!

2009

2009

The bike and I never really got along – a fixie in snow was a disaster (whack, whack went the pedals into my shins as I pushed it), and once a single speed freehub was added, I soon realized I didn’t like only having one gear. The Nokian Gazzaloddi tires were so stiff that once I rode several miles at sub -20f with the rear tire completely flat and didn’t notice. It did convince me though that a real snow bike would be a great idea.

I kicked around getting a “real snow bike”, experimented with SnowCat rims on my summer bike, and dinked around with other options, but nothing really worked that well. Eventually snowbikes became more “normal” and in 2010 I jumped in, buying a shiny new fancy bike from Fatback. It had a E13 fancy pants crank, UMA70mm rims, a three by nine drivetrain, and a 170mm spaced rear hub. So fancy! I think when I got it from Fatback the only one they had in my size was a shiny nickel plated bling bike.

2010

Soon after it arrived into my eager hands I took it on a overnight trip to Wolf Run Cabin in the White Mountains NRA .. which was a bit of a failure, as after 5 miles the trail went from really nice to completely unbroken, and I had to bike back out, switch to skis.

131129_175951562422981_3729697_o

Fortunately, other adventures with more riding ensued, and I was in love. In 2011 I did my first bike race – the susitna 100! It was fun, and a great learning experience.

2011

Then the white mountains in 2011, and the Iditarod Trail Invitational (ITI) in 2012. Alas, just before the ITI I noticed the frame had cracked.. Fatback/Speedway cycles was great about it – they set me up very last minute on a new frame, which was way beyond what was necessary. Then I pushed my bike to Skwentna over the course of 3 days, riding it only for a maybe 15 miles on the road.

The next year I actually road it Skwentna, and then on to Mcgrath..

2013
2013

I had that bike for several years, and had some great adventures on it. Lots of trips around Fairbanks, two rides to McGrath on the Iditarod Trail, several White Mountains 100.

2014

Then wider tires became available, so I moved on to a 190 spaced frame, swapping the parts over to the new frame. That bike rode to Mcgrath, and had lots of other adventures. It even just showed up in an article. The wheels live on, and are on Nancy’s (my wife) bike.

2014 2013

Then, in 2015 I was lured into the 1×11 world, and it was new bike time!

DSC02086

DSC02107

DSC02425

Alas, I rode to Mcgrath that year on the Iditarod trail, and it was really snow free. So many tussocks!

2015

ZZZZ0313

ZZZZ0327

Tussocks! I cracked the seat tube in two places riding over the tussocks between Rohn and Nikolai, but didn’t release it until the following winter when I was trying to track down a creak and looked down the seat tube and there were a few cracks. Then more were discovered when I took the frame bag off. It turns out the only thing holding it together was the seatpost. Thank god for long seat posts – I had ridden the Whites 100 with this bike after the ITI, probably with the crack in place! It wasn’t as bad as some folks had it though – at least two other people snapped their frames in a similar location and at least one person had to lower their seat so the break was supported by their seatpost so thier bike didn’t snap in half.

Fatback was super nice about handling the broken frame and warrantied it, letting me trade up to a fancy pants carbon frame. Alas it was going to arrive until the early spring, leaving me without a bike for several months. So, on an impulse I got a Surly Ice Cream Truck. Surly had one of their ICT models on super clearance – I can’t resist a sale! Hopefully it would tide me over and provide a backup and commuting snow bike once my new super carbon frame arrived.

2017

Up to this point I had just ridden Fatback fat bikes. The Ice Cream Truck was a bit of an eye opener. It rode fine, but it wasn’t as nice riding in snow as the other snow bikes I had ridden. It wasn’t bad, it just didn’t ride as well. Unexciting to ride on snow, and more work in soft snow. It was fun ride on dirt though, fun enough I got some summer wheels built for it. I then talked to a frame builder about getting a custom steel frame in hopes of getting the perfect bike, made from steel and having the long term durability that a steel bike would bring me… But I was pretty worried I would get just what I asked for, but not what I wanted. At the time there was lots of discussion online about the “perfect” snow bike that looked awesome but were very different from either the Fatback’s that I enjoyed, or the Ice Cream Truck that I was “meh”ed about. Worried that I would spend a lot of time and money on a bike that rode more on the “meh” side of things, I gave that up.

The new carbon Corvus Fatback frame I got in 2016 rode like a dream. I took it to Nome twice.

2016

Untitled

DSC04289

DSC04506 DSC03969

DSC03902

Nearly to Mcgrath Topkok This was my first carbon bike, and I rode it like mad. I put a ton of miles on it – two rides to Nome, plus two years of training and exploring on it. Alas, the last trip to Nome was a bit rough on it, and it came back really scraped up from the shipping company. New frame time again! This bike rode even nicer than the last one – sweet! 2018

2018

2020

That bike has been on lots of adventures.. It has been to Nome via the southern route, from Fairbanks to Eagle, and Eagle to Central on the Yukon Quest trail, and many other fun places.

Eagle to Central
Wood Island brownie snowman guards on the Yukon Quest trail.

I am really attached to it now. However, after the last ride on the Yukon Quest trail, where it was banged around a bit on the flight to Eagle, and even more jostled around when it got ride in a trailer filled with with the YQ mile 101 checkpoint outhouses from Central to Fairbanks I figured it was time to start looking at something more durable than carbon.

Jeff Oatley (ITI record holder and super biker extraordinar) suggested I go talk to Greg Matyas of Fatback and see if they would be willing to make a small run of steel or titanium frames. Boom, six months later a steel frame arrived in my eager hands, designed by Fatback and made by Meriwether Cycles. Lots of parts scrounging ensued as I tracked down part from every bike shop in town, and finally it was rideable.

My first ride on it was in late evening in the dark on a five mile loop in my backyard. In the winter I try to take the dogs on it once a day, or twice if I am lucky. The bike rode fantastic!

IMG_20201126_133318616~2

The following weekend I made it out to the White Mountains NRA, and got a bit of riding in.

Cache Mt Solo Trip
Shiloh approves of the new bike..

Cache Mt Solo Trip

Some (rather uninspired) shots from my garage (aka the Shep the SHop/shED)

DSC02469
The rear brake mount is where it “should” be, IMHO, so the cables stay ice free -yay!

DSC02467

A beautiful fork, complete with front rackmounts – double yay!

DSC02475

A beautiful bolt on frame bag, from Tyson F!

DSC02474

Hmm, now I am hungry..
DSC02478

There are a few other nice touches in there, like much larger than normal lower rack mounts bolts, that I am way too lazy to photograph. A huge thank you to Greg M at Fatback, Meriwether, and my local bikes shops Beaver and Goldstream sports.

COVID has cramped my winter adventure plans like it has everyone elses and I don’t know where this thing is going to take me, but I am hoping it is going to be fun.


Dreaming of snowy adventures…

An Update

I should probably add a bit of a post script here.

First – In case I make it sound like all Fatback’s bike break: They don’t. I am a 220 lb person who has a really mashing pedal stroke who is clutz. I have worked to clean up / round out my pedalling style, and in addition to making my knees happy, I stopped breaking frames. Yay!

Second: I don’t really have any deep thoughts on snow bike design. I am not a subtle, introspective, or insightful person. When I put spice on my food, I put so much on it my daughters complain it makes their food taste bad when sitting across the table from me. When I clean the house I use so much soap and cleaner sometimes my wife Nancy has to leave as she says the smell gives her a headache. All I know is that the spice makes my food taste good, and lots of soap makes the floor clean. I am probably the same about bikes – I know I like something, but I have really no idea why, or what makes it “good”.
In the winter I have trails I can ride on snow right out of my house. Like, literally – right off my porch. From there I can access a huge winter trail system that extends to the BLM White Mountains (one of my favorite areas in the winter), to the Canadian Border on the Yukon Quest trail, and in some years on to Nome, Kotz, and beyond. I have only been “far” on the Yukon Quest side, but dream of heading out my door and biking to Kotz or beyond in some future trip. Hopefully that will happen..

The trails from my house generally start really good, then can get worse or sometimes if I am really lucky, get better. The same thing goes for trails in the Whites – mostly they are pretty good, with a mix of softer stuff here and there, and some walking. So, the best snow bike for me rides fast on firm trails, but still handles well in soft snow. I also need tires that work good in soft snow, but are not so slow the “fast” sections are not fun. My rides also tend to be pretty long – interesting places to explore tend to be not right my door, or the trail head, but hours away. Everything becomes a compromise at this point.

This is probably why I am so happy with the Fatback’s geometry. It seems (to me anyway) to be a good compromise for my local conditions – it rides great on firm trails, and pretty good in soft snow. Or to put it another way, I am never unhappy with how it rides. The only thing I was unhappy with is the durability of the carbon frame – and this new steel Meriweather/Fatback gives me the best of both worlds. A ride quality I enjoy, in a durable steel frame. Yay!

Your mileage may vary of course.

10 Responses to “New Bike Day!”

  1. PaulC says:

    Love my Meriwether. You weren’t tempted to the 27.5 B Fat genre?

    • spruceboy says:

      I would be, if the tire selection was better. It seems right now the only good ones are the 45N D5s, but I would like to run something a bit wider. I hope life in Whitehorse is treating you well! I was hoping to ride from there to Fairbanks but alas covid. Stay healthy!

      • PaulC says:

        I really like the Cake Eaters on the Xiphias 95mm rims, seem to float better than Bud/lous on Clownshoes. I also run studded Gnarwhals on Jackalopes which are really good as well. When conditions are solid and fast, I’ll switch over to Barbegazi 4.5s Haven’t tried the 45Nrths. The CE 4.5s have a greater circumference than the Bud/Lou 26″ers.

        • Jay C says:

          I tried the CE in the 26″ format, and I didn’t really like them – they seemed to roll a bit slow on the firm, dry snow we have a lot of here as compared to the 45n tires. I have some of the Johnny 5 I keep meaning to try. Basically, I want big, fast rolling, and studded – so far the D5s are the closest I have found, though lately I have been using the Husker Du 5 in the back with a few grip studs. Not sure it it would work if I ever have to put in a tube in though as I think they might stick though just enough to cause problems. I am tempted by the bigger wheels, but I am too cheap to experiment. ๐Ÿ™‚

  2. Jill Homer says:

    Fun retrospective. I still have a similar blingy 2010 Fatback that I rode around Nome in 2019. All of the local riders there got a kick out of the old Fatback logo.

    My first snow-focused bike was also a Frankenbike โ€”ย an old Raleigh steel hardtail with Sno-Cats and 2.7″ tires with the tread shaved off. It’s fun reminiscing about how hard I tried to make it work. I bought a Surly Pugsley with the classic Large/Marge endomorph combo in 2007. It rode quite terrible compared to modern fat bikes, but I miss it still.

  3. Whit Johnson says:

    So cool to see the history of your bikes leading up to the new one! Hope the new bike brings you lots of smiles and is with you a long time. Someday i’ll make it up your way and you’ll have to point me in the right direction of those huts.
    Cheers!

    • spruceboy says:

      Thanks for making it, I couldn’t be happier with it! When you make it up to Alaska look me up. If traveling to places to snow bike tour is a thing, then Fairbanks would be a winter destination, winter biking here is fantastic! Thanks again!

  4. Dan Rizzolo says:

    Are the specs on that steel Meriwether/Fatback frame available online anywhere? Curious about the geometry. Thanks for the cool post.

Leave a Reply to Jay C